Chaldron wagons were a type of coal wagon used on the early railways. They evolved from pre-railway coal wains. The term “chaldron” was a unit of measurement for coal. The weight varied across regions, but in the northeast of England, it was 53 hundredweight (cwt), or 2,693 kgs, the same weight as a newborn blue whale!
Chaldron wagons were a significant part of the Stockton and Darlington Railway (S&DR), being used from its inception in 1825. Horses and stationary winding engines were used to haul wagons full of coal from Witton Park to Shildon. Here, the wagons were uncoupled and attached to a steam locomotive to complete the journey from Shildon through Darlington and on to Stockton-on-Tees.
Chaldron Wagons, opposite Ryton, Northumberland, by Samuel Hieronymus Grimm. Courtesy of the British Library, London.
About The Model
The Chaldron Wagon model consists of 173 pieces of K’nex and is a small model, measuring less than 25cm in length.
Instructions
To build the Chaldron Wagon model, you will need the following K’nex pieces.
If you don’t have these shape pieces in these colours, you can use other colours.
Two chaldron wagons are required for the Brusselton Incline model, and one chaldron wagon, plus a horse, is necessary for the Gaunless Bridge model.
Chaldron wagons were a type of coal wagon used on the early railways. They evolved from pre-railway coal wains. The term “chaldron” was a unit of measurement for coal. The weight varied across regions, but in the northeast of England, it was 53 hundredweight (cwt), or 2,693 kgs, the same weight as a newborn blue whale!
Chaldron wagons were a significant part of the Stockton and Darlington Railway (S&DR), being used from its inception in 1825. Horses and stationary winding engines were used to haul wagons full of coal from Witton Park to Shildon. Here, the wagons were uncoupled and attached to a steam locomotive to complete the journey from Shildon through Darlington and on to Stockton-on-Tees.
Chaldron Wagons, opposite Ryton, Northumberland, by Samuel Hieronymus Grimm. Courtesy of the British Library, London.
About The Model
The Chaldron Wagon model consists of 173 pieces of K’nex and is a small model, measuring less than 25cm in length.
Instructions
To build the Chaldron Wagon model, you will need the following K’nex pieces.
If you don’t have these shape pieces in these colours, you can use other colours.
Two chaldron wagons are required for the Brusselton Incline model, and one chaldron wagon, plus a horse, is necessary for the Gaunless Bridge model.
Chaldron wagons were a type of coal wagon used on the early railways. They evolved from pre-railway coal wains. The term “chaldron” was a unit of measurement for coal. The weight varied across regions, but in the northeast of England, it was 53 hundredweight (cwt), or 2,693 kgs, the same weight as a newborn blue whale!
Chaldron wagons were a significant part of the Stockton and Darlington Railway (S&DR), being used from its inception in 1825. Horses and stationary winding engines were used to haul wagons full of coal from Witton Park to Shildon. Here, the wagons were uncoupled and attached to a steam locomotive to complete the journey from Shildon through Darlington and on to Stockton-on-Tees.
Chaldron Wagons, opposite Ryton, Northumberland, by Samuel Hieronymus Grimm. Courtesy of the British Library, London.
About The Model
The Chaldron Wagon model consists of 173 pieces of K’nex and is a small model, measuring less than 25cm in length.
Instructions
To build the Chaldron Wagon model, you will need the following K’nex pieces.
If you don’t have these shape pieces in these colours, you can use other colours.
Two chaldron wagons are required for the Brusselton Incline model, and one chaldron wagon, plus a horse, is necessary for the Gaunless Bridge model.
Chaldron wagons were a type of coal wagon used on the early railways. They evolved from pre-railway coal wains. The term “chaldron” was a unit of measurement for coal. The weight varied across regions, but in the northeast of England, it was 53 hundredweight (cwt), or 2,693 kgs, the same weight as a newborn blue whale!
Chaldron wagons were a significant part of the Stockton and Darlington Railway (S&DR), being used from its inception in 1825. Horses and stationary winding engines were used to haul wagons full of coal from Witton Park to Shildon. Here, the wagons were uncoupled and attached to a steam locomotive to complete the journey from Shildon through Darlington and on to Stockton-on-Tees.
Chaldron Wagons, opposite Ryton, Northumberland, by Samuel Hieronymus Grimm. Courtesy of the British Library, London.
About The Model
The Chaldron Wagon model consists of 173 pieces of K’nex and is a small model, measuring less than 25cm in length.
Instructions
To build the Chaldron Wagon model, you will need the following K’nex pieces.
If you don’t have these shape pieces in these colours, you can use other colours.
Two chaldron wagons are required for the Brusselton Incline model, and one chaldron wagon, plus a horse, is necessary for the Gaunless Bridge model.
Chaldron wagons were a type of coal wagon used on the early railways. They evolved from pre-railway coal wains. The term “chaldron” was a unit of measurement for coal. The weight varied across regions, but in the northeast of England, it was 53 hundredweight (cwt), or 2,693 kgs, the same weight as a newborn blue whale!
Chaldron wagons were a significant part of the Stockton and Darlington Railway (S&DR), being used from its inception in 1825. Horses and stationary winding engines were used to haul wagons full of coal from Witton Park to Shildon. Here, the wagons were uncoupled and attached to a steam locomotive to complete the journey from Shildon through Darlington and on to Stockton-on-Tees.
Chaldron Wagons, opposite Ryton, Northumberland, by Samuel Hieronymus Grimm. Courtesy of the British Library, London.
About The Model
The Chaldron Wagon model consists of 173 pieces of K’nex and is a small model, measuring less than 25cm in length.
Instructions
To build the Chaldron Wagon model, you will need the following K’nex pieces.
If you don’t have these shape pieces in these colours, you can use other colours.
Two chaldron wagons are required for the Brusselton Incline model, and one chaldron wagon, plus a horse, is necessary for the Gaunless Bridge model.
Historical K'Nexions 